H3C SFP-XG-LH80-TunableCompatible 10G DWDM Tunable SFP+ optical transceiver is a high-performance and cost-effective SFP+ transceiver module designed for 10G SDH/SONET, 10G Ethernet DWDM fiber optic transmission applications, designed to support the full range of C-band ITU-T wavelengths data rates up to 11.3Gbs and distances up to 80km.
Product Details
| H3C Compatible | SFP-XG-LH80-Tunable | Vendor Name | Walsun |
| Form Factor | SFP+ | Max Data Rate | 11.3Gbps |
| Wavelength | 1528.38nm~1565.50nm | Max Distance | 80km |
| Connector | Duplex LC | Transmitter Type | DWDM EML |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | -1.0~+3.0dBm | Receiver Sensitivity | < -23.0dBm |
| Protocols | MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Frequently Asked Questions About 10GBASE-T SFP+ Module
Q: What cables are supported with 10GBASE-T SFP+ modules?
A: The module is compatible with 10GBASE-T, 1000BASE-T, and 100BASE-T. The Supported cables as below:
| Speed | Cable Type | Max. Cable Distance |
|---|---|---|
| 10GBASE-T | Cat 6a | 30m-50m |
| Cat6a shielded/Cat 7 | 80m-100 m | |
| 1000BASE-T / 100BASE-T | Cat 6/Cat 6a /Cat5e | 100m |
Q: Can the 10GBASE-T be used at low temperatures?
A: The 10GBASE-T is available in commercial and industrial versions. Standard products are suitable for operating temperature range of 0~70 °C. For a wider temperature range, it is recommended to purchase industrial modules (-40 to 85°C) .
Q: What are their differences of 10GBASE-T SFP+ vs SFP+ DAC vs Fiber SFP+?
A:10GBASE-T SFP+, SFP+ DAC, and SFP+ Transceiver are the most commonly used types in the 10G network.
| Comparsion | SFP+ DAC | 10GBASE-T SFP+ | SFP+ Fiber |
|---|---|---|---|
| Media | Integrated copper/fiber | Category 6a or 7 | Fiber Cable (SM/MM) |
| Connector | SFP+ | RJ45 | LC |
| Distance | 15m | 30m-100m | Max 100km |
| Cabling System | No | Copper cabling | Fiber cabling |
| Data rate | 10 Gbps | 10 Gbps | 10 Gbps |
| Power Consumption | 1~1.5w | 2~5w | ~0.7w |
Q: Where can 10GBASE-T be used?
A: If using 10GBASE-T, the places are required to be in the Data Center or horizontal areas (in building, including wiring closet). But it is not suited for vertical (riser links) applications within building, or campus & metro applications.
The 10GBASE-T modules are used in Data Center TOR areas.
Cases for 10GBASE-T Ethernet Connections
When the two switches both have SFP+ and 10GBASE-T ports, it is recommended to use the 10GBASE-T copper ports first, and save the SFP+ ports for possible future connections to an optical network for longer transmission distance.
Related Article:
HPE 504441-001 Compatible 8G SFP+ LW 1310nm 10km LC SMF DDM Transceiver Module
Huawei SFP-10G-ER-1310 Compatible 10G SFP+ ER 1310nm 40km LC SMF DDM Transceiver Module
D-Link DEM-431XT Compatible 10G SFP+ SR 850nm 300m LC MMF DDM Transceiver Module
Dell SFP-10GZR-55 Compatible 10G SFP+ ZR 1550nm 80km LC SMF DDM Transceiver Module
HPE Procurve J9152A Compatible 10G SFP+ LRM 1310nm 220m LC MMF DDM Transceiver Module
