H3C SFP-XG-LH80-SM1550-BIDI Compatible 10G BX SFP+ BIDI transceiver supports up to 80km over OS2 SMF via an LC simplex connector. This transceiver is compliant with SFF-8431 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. It Supports 1550nm EML and 1490nm APD into an LC connector, which allows an 80km link distance over single-mode fiber.
Product Details
| H3C Compatible | SFP-XG-LH80-SM1550-BIDI | Vendor Name | Walsun |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | TX1550nm/RX1490nm | Max Distance | 80km |
| Connector | Simplex LC | Transmitter Type | 1550nm EML |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+4.0dBm | Receiver Sensitivity | < -22.0dBm |
| Protocols | 10G Ethernet, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Frequently Asked Questions About 10GBASE-T SFP+ Module
Q: What cables are supported with 10GBASE-T SFP+ modules?
A: The module is compatible with 10GBASE-T, 1000BASE-T, and 100BASE-T. The Supported cables as below:
| Speed | Cable Type | Max. Cable Distance |
|---|---|---|
| 10GBASE-T | Cat 6a | 30m-50m |
| Cat6a shielded/Cat 7 | 80m-100 m | |
| 1000BASE-T / 100BASE-T | Cat 6/Cat 6a /Cat5e | 100m |
Q: Can the 10GBASE-T be used at low temperatures?
A: The 10GBASE-T is available in commercial and industrial versions. Standard products are suitable for operating temperature range of 0~70 °C. For a wider temperature range, it is recommended to purchase industrial modules (-40 to 85°C) .
Q: What are their differences of 10GBASE-T SFP+ vs SFP+ DAC vs Fiber SFP+?
A:10GBASE-T SFP+, SFP+ DAC, and SFP+ Transceiver are the most commonly used types in the 10G network.
| Comparsion | SFP+ DAC | 10GBASE-T SFP+ | SFP+ Fiber |
|---|---|---|---|
| Media | Integrated copper/fiber | Category 6a or 7 | Fiber Cable (SM/MM) |
| Connector | SFP+ | RJ45 | LC |
| Distance | 15m | 30m-100m | Max 100km |
| Cabling System | No | Copper cabling | Fiber cabling |
| Data rate | 10 Gbps | 10 Gbps | 10 Gbps |
| Power Consumption | 1~1.5w | 2~5w | ~0.7w |
Q: Where can 10GBASE-T be used?
A: If using 10GBASE-T, the places are required to be in the Data Center or horizontal areas (in building, including wiring closet). But it is not suited for vertical (riser links) applications within building, or campus & metro applications.
The 10GBASE-T modules are used in Data Center TOR areas.
Cases for 10GBASE-T Ethernet Connections
When the two switches both have SFP+ and 10GBASE-T ports, it is recommended to use the 10GBASE-T copper ports first, and save the SFP+ ports for possible future connections to an optical network for longer transmission distance.
Related Article:
HPE CWDM-SFP10G-1470 Compatible 10G CWDM SFP+ 1470nm 80km LC SMF DDM Transceiver Module
H3C SFP-XG-LH80-SM1490-BIDI Compatible 10G BX SFP+ BIDI TX1490nm-RX1550nm 80km LC SMF DDM Transceiver Module
Huawei SFP-10G-LR Compatible 10G SFP+ LR 1310nm 10km LC SMF DDM Transceiver Module
Dell GP-SFP-10GBX-D-40 Compatible 10G BX SFP+ BIDI TX1330nm-RX1270nm 40km LC SMF DDM Transceiver Module
Dell GP-10GSFP-1E Compatible 10G SFP+ ER 1550nm 40km LC SMF DDM Transceiver Module
